Search results for "thermal [radiation mechanism]"
showing 10 items of 2571 documents
Decomposition of ammonium sulfate residue in a high solid/gas ratio suspension state with an industrial-scale reactor system (production line)
2015
Abstract Ammonium sulfate residue is a particulate solid and is produced during the manufacture of ammonium sulfate fertilizer. The residue used in this study contained a large portion of calcium carbonate, from which active lime (CaO) was recovered via thermal decomposition. We used a purpose-built device to decompose the residue in a semi-suspension state. We found that CaO had the highest activity when residue was decomposed at 850–900 °C. Our experiments indicated that ammonium sulfate residue should be decomposed in a suspension state to produce active CaO. Based on our laboratory test findings, an industrial-scale production line with a high solid/gas ratio in a suspension state was d…
Correlated barrier hopping in NiO films
1991
The ac conduction in NiO films has been investigated in the frequency range 10 Hz < v < 10^9 Hz and at temperatures between 10 and 300 K. The frequency and the temperature dependence of the electrical conductivity can be consistently explained within a model developed for the mechanism of charge transfer in amorphous semiconductors which proposes that charge carriers hop over potential barriers between defect sites, the height of the barriers being correlated with the intersite separation.
Solution processable piperazine and triphenyl moiety containing non-symmetric bis-styryl-DWK type molecular glasses with light-emitting and amplified…
2018
A series of 2,6-bis-styryl-4H-pyran-4-ylidene fragment containing glassy organic compounds with chemically stable bonding of amorphous phase promoting bulky triphenyl moieties through piperazine structural fragment (DWK-T dyes) in a form of 2-(5,5,5-triphenylpentyl)piperazin-1-yl)styryl)-substituent have been synthesized and investigated as the potential gain medium component for organic solid state laser applications. Physical properties of the dyes vary and are mostly depending from the other styryl-substituent attached to the 4H-pyran-4-ylidene backbone fragment in 6-position. Thermal stability of synthesized dyes is above 312°C with the glass transitions from 97°C to 109°C. Obtained nea…
Glass-forming derivatives of 2-cyano-2-(4H-pyran-4-ylidene) acetate for light-amplification systems
2019
Abstract A series of 2-cyano-2-(4H-pyran-4-ylidene) acetate derivatives with triphenyl and 9H-carbazole moieties were synthesized and investigated, mostly for potential applications in organic solid state lasers. Synthesized compounds show remarkable amorphous film formation ability, tunable thermal properties (thermal stability varies from 190 °C to 387 °C and glass transition temperature from 94 °C up to 141 °C) with light absorption from 400 nm to 600 nm and photoluminescence from 600 nm up to 800 nm. Dyes with incorporated mono-styryl- electron donating fragment (KTB, KTBC and KTB3K) showed higher photoluminescence quantum yield (PLQY) (from 16% up to 23%), significantly lower amplified…
Amplified Spontaneous Emission Properties of Solution Processed CsPbBr3 Perovskite Thin Films
2017
Metal halide perovskites are currently emerging as highly promising optoelectronic materials. It has been recently demonstrated that fully inorganic solution processed CsPbBr3 perovskite thin films show good electroluminescence properties combined with high thermal stability. In this work, we investigate in details the amplified spontaneous emission (ASE) properties of CsPbBr3 perovskite thin films, as a function of the temperature and the trap density, modified by changing the CsBr-PbBr2 precursor concentration. ASE is observed in samples from both CsBr-rich solution (low trap density) and equimolar solution (higher trap density), up to about 150 K, with a minimum threshold of 26 and 29 mu…
TASCAを用いたCn, Nh, Fl化学実験のためのHg, Tl, PbのSiO2及びAu表面に対するオンライン化学吸着研究
2018
Online gas-solid adsorption studies with single atom quantities of Hg, Tl, and Pb on SiO$_{2}$ and Au surfaces were carried out using short-lived radioisotopes with half-lives in the range of 4-49 s. This is a model study to measure adsorption enthalpies of superheavy elements Cn, Nh, and Fl. The short-lived isotopes were produced and separated by the gas-filled recoil separator TASCA at GSI. The products were stopped in He gas, and flushed into gas chromatography columns made of Si detectors whose surfaces were covered by SiO$_{2}$ or Au. The short-lived Tl and Pb were successfully measured by the Si detectors with the SiO$_{2}$ surface at room temperature. On the other hand, the Hg did no…
Understanding the role of Ti-rich domains in the stabilization of gold nanoparticles on mesoporous silica-based catalysts
2018
3 Tablae, 14 Figures.-- Supplementary material.-- © 2018. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
Alkaline treatment as a means to boost the activity of TiO(2)in selective photocatalytic processes
2020
In this work, the activity enhancement of TiO(2)photocatalysts by alkaline treatment has been investigated. Commercial (BDH, U.K., anatase phase) TiO(2)samples, treated in alkaline solutions of NaOH at different concentrations and temperatures, were tested for the photocatalytic partial oxidation of 3-pyridinemethanol in water under UVA irradiation to form vitamin B-3. Photocatalyst characterization has been carried out by XRD, BET, TEM, TGA, photoluminescence, FTIR, Raman, DRS, EPR and photocurrent measurements. The alkaline-treated samples showed an increased activity of up to 7 times (by considering first order rate constant values) compared to untreated BDH and the superior performance …
A comparative study of the photocatalytic activities of iron-titanium (IV) oxide photocatalysts prepared by various methods; spray pyrolysis, impregn…
1995
Abstract A series of iron/titanium oxide photocatalysts of varying Fe 3+ content have beenprepared by a number of different methods and subjected to controlled thermal treatment. Specimens have been characterised in terms of their crystalline structure and morphology, and indicate solid solutions containing both the anatase and rutile phases of TiO 2 , together with the formation of pseudo-brookite in some specimens. Intrinsic photo-activity measurements have been performed using a standard liquid-phase photocatalytic reaction. Results indicate that the photocatalytic activity of the specimens differs according to the method of preparation, and that all solids containing iron (III) species …
Mesocrystalline anatase nanoparticles synthesized using a simple hydrothermal approach with enhanced light harvesting for gas-phase reaction
2018
Mesocrystalline TiO2 nanoparticles were synthesized using a hydrothermal approach. A simple two-step procedure at low temperature (<140 °C) allowed the nucleation of primary particles sized 2–4 nm and their subsequent assembly as almost spherical aggregates sized ≈20 nm. X-ray powder diffraction (XRD), Raman and X-ray photoelectron spectroscopy (XPS) studies, and HRTEM studies confirmed anatase as the unique TiO2 crystalline phase. The mesocrystalline structure of the anatase aggregates was clearly evidenced by HRTEM and SAED results. The mesocrystalline nanopowders exhibit a mesoporous structure with a surface area and pore volume of 63.5 m2 g−1 and 0.22 cm3 g−1, respectively. Ultraviolet …